TALOS M50

Automatic bollard for perimeter security

Automatic oil-hydraulic system, 230 Vac

PERIMETER SECURITY

Intended for traffic control and protection of those sensitive areas (embassies, military bases, government palaces, banks, etc.), where a high level of perimeter security is needed against terrorist attacks. Designed and tested to safely withstand, in a single bollard configuration, A 16,500 lb vehicle traveling at 50 mph. and stay intact and fully operative. EFO (Emergency Fast Operation) version also available for quick rising in an emergency.

OIL-HYDRAULIC

Hydraulic locking device in standing position (standard) and emergency manual lowering by a release spanner supplied with the equipment. Drive unit with two lobe pumps. Burglar-proof cover plate preventing the release system from being accessed and thus the bollard from being lowered.

STRONG

Scratch-proof cataphoresis treated and polyester powder coated steel rising cylinder. Available also with an AISI 304 stainless steel cover sleeve, thickness 12/10. Breakout resistance: 2,000,000 J.
Connector and junction box IP 66 for cabling. Hall effect limit switch sensors, cylinder head with rubber edge and incorporated LED lights.

VERSATILE

A vast range of command and safety accessories allow for reliable and precise control of the installations. Beeper to signal the movements. Heating device for installations in very low temperature conditions -40 °F, where snow and ice are frequent. The electronic control unit can be set so that it can manage several bollards at a time.

CERTIFICATES

Classes of performance: K12 / M50 / C750

Certified:

ASTM F2656-15 C750

PAS 68:2013 V/7500 (N3)/80

IWA 14-1:2013 V/7200 [N3C]/80

Talos M50 Fadini Dimensional Chart copy.png

Cylinder diameter (inches)

Cylinder thickness (inches)

Cylinder height from ground (inches)

Cylinder material: S355K2H Steel

Cylinder treatment and finishing: cataphoresis and polyester powder coating RAL 7016AISI 304 brushed SS steel sleev

Pit: hot dip galvanization

Rising time (s) [cm/s] ~5,00 [20]

Lowering time (s) [cm/s] ~3,20 [31]

Working temperature (°F) -4 / 176 -40 [A]

Oil type: 187 gallons

Power supply (Vac – Hz) 230 - 50

Absorbed power (W) 3.100 (1.550 + 1.550)

Absorbed current (A) 10 / 13

Grade of protection IP / motor-pump: 67

Frequency of use (cycles/day): heavy duty / 2,000

Impact resistance (J) 700,000

Breakout resistance (J) 2,000,000

Maximum static load (kg) 44

Fully Retractable Ultra High-Security Automatic Bollard

Fully retractable, heavy-duty automatic bollard featuring a self-contained hydraulic drive unit integrated within the main assembly and a hydraulic actuator housed inside the rising post.

Designed for the protection of sensitive facilities requiring the highest level of perimeter security.

Certified and tested to:

ASTM F2656-15 M50/P1 (C750 equivalent)
PAS 68:2013 V/16,535 lb (N3)/50 mph
IWA 14-1:2013 V/15,870 lb [N3C]/50 mph

Engineered to stop, in a single-bollard configuration, a 16,500 lb vehicle traveling at 50 mph.

IP67 rated (dust-tight and protected against temporary immersion).

Above finished grade height: 39".

Construction

Rising post constructed from S355K2H high-strength structural steel, 3/4" wall thickness, and 10-3/4" outside diameter, treated with a cathodic electrocoating (e-coat) primer and finished with a polyester powder coat. Optional brushed AISI 304 stainless steel cover sleeve available.

Aluminum top cap with protective rubber edge and twelve (12) integrated amber LED lights, complete with a tamper-resistant e-coated aluminum cover plate. Both cap and cover plate are slip-resistant and traffic-rated.

Moving post fitted with an approved high-intensity microprismatic retroreflective band (3" height).

Hot-dip galvanized steel in-ground foundation casing.

EFO (Emergency Fast Operation) version available for rapid deployment in emergency situations.

Performance Ratings

Impact resistance: 516,300 ft-lbs (700,000 J)
Breakaway resistance: 1,475,100 ft-lbs (2,000,000 J)
Maximum static load (raised position): 6,170 lbs
Maximum static load (lowered position): 44,100 lbs

Operating Specifications

Operating temperature range: -40°F to +176°F
Power supply: 230 VAC ±10%, 50 Hz
Power consumption: 3,100 W
Approximate raising time: 5 seconds
Duty rating: Intensive use – up to 2,000 cycles per day