Coral

Fully retractable bollard for access control

Automatic oil-hydraulic system, 230 Vac

DESIGN AND MANUFACTURING

Recommended to control access to residential areas and also for commercial and industrial applications.

OIL-HYDRAULIC

Hydraulic lock for parking in the raised position (standard) and emergency lowering operation with supplied release key.Solenoid valve (optional) for automatic lowering in case of power failure.Tested for intensive use in both low and high temperatures.

EASY ACCESS TO THE OIL-HYDRAULIC COMPONENTS

The handy housing position of the motor pump and oil-hydraulic actuator inside the bollard allows for easy maintenance and reduces service and installation times. In this way the components are also more protected, rust and other factors of deterioration are prevented.

SIMPLE AND QUICK TO INSTALL

Reduced weight of the pit so that no particular excavation or brick works are needed. Cataphoresis treated and polyester powder coated scratch-proof steel cylinder, head with rubber edge. Hall effect limit switch sensors, LED lights (optional).

VERSATILE

A vast range of command and safety accessories allow for reliable and precise control of the installations. The electronic control unit can be set so that it can manage several bollards at a time.

Cylinder diameter (mm) 100

Cylinder thickness (mm) 5

Cylinder height from ground (mm) 500/600/800

Cylinder material S235JRH steel

Cylinder treatment and finishing cataphoresis and polyester
powder coating RAL 7016

Pit hot dip galvanization

Working temperature (°C) -20 ÷ +80
-40 [A]

Oil type 708L

Power supply (Vac – Hz) 230 - 50

Absorbed power (W) 330

Absorbed current (A) 1,8

Power yield (kW / HP) 0,25 / 0,33

Grade of protection IP
of the hydraulic motor-pump 67

Frequency of use (cycles/day) heavy duty / 2.000

Impact resistance (J) 30.000

Breakout resistance (J) 150.000

Maximum static load (kg) 20.000

Fully retractable, heavy duty, automatic bollard consisting of an oil-hydraulic motor-pump unit incorporated inside the main structure and an oil-hydraulic actuator inside the moving cylinder. Suitable to meet residential, commercial and industrial requirements and urban applications. IP 67. Height from ground level can be 500, 600 or 800 mm. Scratch-proof S235JRH steel moving cylinder, thickness 5 mm and ø 100 mm, cataphoresis treated and polyester powder coated. Cylinder head made of aluminium with rubber edge, cataphoresis treated aluminium cover plate. Head and cover plate are slip-proof and tread resistant. Moving cylinder fitted with an approved, retro-reflecting, high intensity, micro-prismatic, high intensity adhesive film (h 80 mm), available with No. 4 amber-colour signalling LED lights flashing and radially fitted, 10 m electric cable. Hot-dip galvanized steel pit. Cover plate allowing access to the hydraulic release device for the manual lowering of the bollard by a special spanner in an emergency. Impact resistance 30.000 J, breakout resistance 150.000 J, static load max 1.600 kg (bollard in raised position), max 20.000 kg (in lowered position). Working temperature -40 ÷ +80 °C. Supply voltage 230 Vac ± 10%, 50 Hz. Absorbed power 330 W. Rising time ~ 4,7 s [h 500 mm from ground level], ~ 5,6 s [h 600 mm from ground level] ~ 7,5 s [h 800 mm from ground level]. Intensive use, 2.000 cycles/a day.